Should I Use CPK Or PPK?

What is CP CPK?

Cp and Cpk, commonly referred to as process capability indices, are used to define the ability of a process to produce a product that meets requirements.

Specifications are normally defined in terms of nominal (+/-) tolerances or ranges (low to high..

What does a PPK of 1.33 mean?

meeting customer requirementsPpk < 1.33. The process is substandard for meeting customer. requirements. Process improvements must be given high.

What is a good CPK?

The higher the Cpk, the better is the capability of the process to meet its requirements. In the industry, a Cpk of less than 1.66 needs a closer look. A Cpk that’s less than 1.33 needs some action to make it higher, and a Cpk of less than 1.0 means that the process is not capable of meeting its requirements.

How is PPK calculated?

Process Mean close to USL If your Process Mean (central tendency) is closer to the USL, use: Ppk = [ USL – x(bar) ] / 3 s, where x(bar) is the Process Mean.

What is a good CP and CPK?

We generally want a Cpk of at least 1.33 [4 sigma] or higher to satisfy most customers. Cpk can have an upper and lower value reported. If the upper value is 2 and the lower is 1, we say it has been shifted to the left.

What does PPK stand for?

PPKAcronymDefinitionPPKPunt, Pass, and Kick (NFL youth program)PPKProfessional Protection KitPPKPalm Portable KeyboardPPKPublic Private Key16 more rows

What is CPK and how is it calculated?

Cpk is a process capability index used to measure what a process is capable of producing. … The formula for the calculation of Cpk is Cpk = min(USL – μ, μ – LSL) / (3σ) where USL and LSL are the upper and lower specification limits, respectively.

Why is PPK higher than CPK?

The automotive confusion aside, Ppk will always be greater than Cpk since Ppk is long term capabliity and Cpk is short term capability. The only way that Cpk will be greater than Ppk (other than a misuse of the terms and formulas) is under the conditions stated in a previous post.

How many Sigma is 1.67 Cpk?

6 sigmaCp = Cpk = 1.67. The sigma level is now 5 – the specifications are five standard deviations away from the average. The out of specification has decreased to 0.57 ppm. The fourth curve represents that magical 6 sigma level.

What does a Cpk of 1.67 mean?

The Capability Index, Cpk. The outcome of a Process Capability study is a single metric, which provides an indication of the ability of a process to consistently provide output which is within required specifications. CPK <1.00 (Poor, incapable) 1.00< CPK <1.67 (Fair) CPK >1.67 (Excellent, Capable)

What does CPK stand for?

Creatine phosphokinaseCreatine phosphokinase (CPK) is an enzyme in the body. It is found mainly in the heart, brain, and skeletal muscle.

Which is better CPK or PPK?

If we look at the formulas for Cpk and Ppk for normal (distribution) process capability, we can see they are nearly identical: The only difference lies in the denominator for the Upper and Lower statistics: Cpk is calculated using the WITHIN standard deviation, while Ppk uses the OVERALL standard deviation.

What does CPK and PPK stand for?

Sorry to tell, but definition of Cpk and Ppk is wrong, it´s just the other way round: Ppk is a short term analysis (mostly done with 50 or 100 samples measured) Ppk is Process Potential Capability. Cpk is long term analysis and is Continous Process capability.

What does a negative CPK indicate?

The process mean is closer to the lower specificationExplanation: A negative Cpk is an indication that the process mean has drifted over either the upper specification or the lower one. It is not a math error, however it could be. It is impossible to have a negative standard deviation.

What is a good CPK and PPK?

According to Six Sigma philosophy, Cp or Pp and Cpk or Ppk should be greater than 1.50. From a technical standpoint, Six Sigma deems a process being acceptable only after achieving a maximum defect rate of 3.4 parts per million opportunities.

What does a Cpk of 2.0 mean?

process capability indexThe process capability index, or Cpk, measures a process’s ability to create product within specification limits. … When the Cpk is greater than or equal to one, the process is considered capable of producing a product within specification limits. In a Six Sigma process, the Cpk equals 2.0.

What is the maximum Cpk value?

1.0The minimum value of “k” is 0 and the maximum is 1.0. A perfectly centered process will have Cp = Cpk. Both Cpk and Ppk relate the standard deviation and centering of the process about the midpoint to the allowable tolerance specifications.

What should PPK be?

The larger the Ppk, the less the variation between process output and specifications. If Ppk is between 0 and 1.0, not all process output meets specifications. If the system is centered on its target value, Ppk should be used in conjunction with the Pp index.