- Do I need a crossover cable to connect two switches?
- What are the benefits of switch stacking?
- How long do network switches last?
- What does 10/100/1000 mean on a switch?
- DO network switches have IP addresses?
- Can you use multiple switches on a network?
- How do you connect two switches and hubs together?
- Can you connect 2 switches to a router?
- DO network switches slow down speed?
- Is it bad to daisy chain network switches?
- How many switches can you connect together?
Do I need a crossover cable to connect two switches?
Technically speaking, cross over cables are supposed to be used when connecting devices of the same “type” together.
Like connecting 2 PCs together, or 2 switches together.
When connecting devices of different types together you use a straight through cable.
Like when plugging a PC into a switch..
What are the benefits of switch stacking?
Compared to the use of multiple standalone switches, stacking technology provides several advantages related to simplicity, scalability, and flexibility. A stack of switches appears to the operator and the rest of the network as one single switch, making it easier to manage and configure.
How long do network switches last?
around five yearsPhysical Switches/Routers: Generally, wired networking devices can last around five years. They’ll definitely show their age in the last couple years, but usually won’t create drag on a business unless it’s specifically focused on data-heavy operations or going all-in on video-based technologies.
What does 10/100/1000 mean on a switch?
An Ethernet switch that automatically senses the speed (10 Mbps, 100 Mbps or 1 Gbps) of the device at the other end. High-end Ethernet switches are 10/100/1000 devices, and although they are sometimes identified as hubs, they are not shared devices.
DO network switches have IP addresses?
Unmanaged and layer 2 network switches do not have an IP address, whereas managed switches and layer 3 switches do. A network switch with an IP address is required for Telnet which allows remote access to the switch. The IP address of a switch can be found via the router or an IP scanner.
Can you use multiple switches on a network?
Daisy-chaining switches together is generally considered safe, but not recommended if at all possible. Doing so comes with some risks that can cause chaos on a network. If you absolutely have to daisy-chain switches together, the general rule of thumb is to not connect more than three switches with each other.
How do you connect two switches and hubs together?
In the absence of an uplink port, you can connect two hubs or switches together by using MDI-X ports, but you must use a crossover cable to do so. Hub Ports Instead of having a dedicated uplink port, some switches and hubs have a port that you can change between MDI and MDI-X by pushing a button.
Can you connect 2 switches to a router?
Routers route between network, so each router interface belongs to a different network. Since you cannot connect both switches directly to the same router interface, you would be connecting them to two different networks. Also, switches use spanning-tree in order to create a single, loop-free path on the layer-2 LAN.
DO network switches slow down speed?
If you use a fast enough switch for your internet connection, not significantly. … If your switch is not capable of gigabit and your internet service is faster than 100 Mbps, the switch will slow your connection. Non-gigabit switches would be fast Ethernet (aka. 10/100) with a maximum throughput of 100 Mbps.
Is it bad to daisy chain network switches?
Daisy Chain Topology – Daisy Chain Switches One by One For no more than three Ethernet switches, a linear topology of daisy chaining is okay since there is no loop. However, it owns drawbacks in switch failure due to lacking redundancy.
How many switches can you connect together?
There isn’t really any limits about connecting switches, but you should be aware that there is limits of the spanning tree protocol is limited to 7 hops. Twenty switches between two systems seems unusually large, you probably should consider breaking things up into VLANs at that point.